Remove ALL loose debris from between the plaster and lath before applying the conditioner and adhesive. We are not responsible for a failed repair due to user error. We guarantee positive results if used as directed. The distance between those two marks is how far the plaster is from the lath. Make another mark where the plaster surface meets the paperclip. Next pull the paperclip out of the hole until the “L” catches on the back side of the plaster. Then, using a marker, make a mark on the paperclip, where the plaster surface meets the paperclip. Stick the bent end of the paperclip into the hole until it hits the lath. (You may feel the drill jump a little bit if there is space between the plaster and lath.) Drill a hole through the plaster until it hits the wood lath. Straighten the long leg of a large paperclip out, then bend the tip into a 1/8” “L”. How much space is between the plaster and lath? New cracks may appear if adverse conditions continue to exist (such as plumbing leaks, roof leaks, and grading and drainage issues at the foundation). Cracks that were repaired with Plaster Magic® will not re-open. Our product does not prevent new cracks from appearing. Please keep in mind – houses continue to shift over time. It will not work on plaster applied to rock lath, wire lath, veneer plaster on blueboard, or drywall. The Plaster Magic Homeowner’s Pack, adhesive repair system was designed specifically to reattach plaster to wood lath and masonry substrates (like brick, terracotta or concrete block). 1 spray bottle (16 oz) of Plaster Magic® Conditioner.3 cartridges (10 oz) of Plaster Magic® Adhesive.This pack repairs approximately 9 linear feet of cracks or 30 ft² of loose plaster. Plaster Magic Homeowner’s Pack is a smaller repair kit for most small plaster crack repairs.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |